Vapour-barrier-fasteners-by-mr-natural-crawl-space-encapsulation

Vapour Barrier Fasteners for Crawlspace Encapsulation

$44.95

These are the same vapour barrier fasteners mr natural® environmental group has tested and actively uses on our projects.

The foundation pins are used to permanently secure the vapour barrier to the foundation wall. These pins are inserted into a 1/4″ hole drilled by a hammer drill. They are to be installed every two-foot and are made of heavy gauge white plastic. These pins come in packs of 100 pieces and are required for a lasting bond the foundation wall. The heads of our pins will not break off nor will the pin come out of the hole as with others we have tested.

8 in stock (can be backordered)

Description

These vapour barrier fasteners, also called foundation pins, are used to permanently secure the vapour barrier to the foundation wall. These pins are inserted into a 1/4″ hole drilled by a hammer drill. They are to be installed every two-foot and are made of heavy gauge white plastic. These pins come in packs of 100 pieces and are required for a lasting bond the foundation wall. The heads of our pins will not break off nor will the pin come out of the hole as with others we have tested.
**Remember to figure enough pins for 1 every 2′ and two in each corner, one for each wall about 2″ out of the corner.

Features

1.25 Inches (cm)long
One way spine so they don’t come out to securely affix barrier to the wall
Made from virgin plastic so they will last a lifetime
Hole requirement 1/4 inch (cm) hole
White to match our crawl space vapour barriers
Other Information

Additional information

Weight 1 kg
Dimensions 10 × 10 × 5 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…

Cart